How To Change Time On Pioneer Radio

How to Set the Clock on a Pioneer Auto Radio?

You have to printing and hold the SOURCE, FUNCTION, or MULTI-Command (depending on the unit model) on the Pioneer car stereo to open the clock setting. Adjust the hours and minutes through the knob or directional navigation buttons. Once the required time is fix, printing the SOURCE and ESCAPE buttons to return to the master screen.

Table of Contents

How to Set up the Clock on a Pioneer Car Radio?
How to Fix the Clock on a Pioneer Motorcar Stereo? [Unmarried DIN]
- For Unmarried-DIN Pioneer Machine Stereo with MULTI-Command Button?
- For Pioneer DEH-P3600, P3800, and P3900
How to Ready the Clock on a Pioneer Auto Stereo? [Double DIN]

Car owners seldom refer to machine stereo user guides. Therefore, those manuals eventually go misplaced and lost. However, many machine owners miss them when they struggle to ready the clock on the stereo, particularly when they have to alter the time every bit per the daylight saving schedule.

If you have a Pioneer stereo in your car and struggling with the same issue (or peradventure yous demand to reset your unit or see the exact wiring diagram) we've got y'all covered. In this brief guide, we will outline how to set the clock on a Pioneer auto stereo. Nosotros will encompass both single and double-DIN models.

How to Prepare the Clock on a Pioneer Car Stereo? [Single DIN]

Archetype Single DIN Pioneer motorcar stereos are pretty common in many relatively old cars. Most single DIN stereos don't accept a good bill of fare selection and control panel compared with those found in contemporary double-DIN head units. Therefore, setting the time on them tin be tricky.

Since Pioneer has launched various Unmarried DIN models with varied controls, we will share procedures for some of the almost popular designs and interfaces.

For Single-DIN Pioneer Car Stereo with MULTI-CONTROL Button?

If you have a Pioneer automobile stereo with a MULTI-CONTROL push, you demand to follow these steps to prepare the clock. This push looks like a round dial. It'southward also present in many newer double and unmarried-DIN In-Nuance receivers similar MVH-S300BT, MVH-S400BT, FH-S500BT, DEH-S4000BT, and DEH-S4010BT.

Plow off the stereo and printing and hold the Multi-Control button for a couple of seconds. Information technology will display a menu with different options.
Rotate the Multi-Control knob until the carte du jour reaches the "Clock Set"
Printing the knob upward and downwards to modify the number of hours and minutes, and towards left and right to jump between hours and minutes.
Press the Escape or Source button to get out with the saved changes

Check the video

For Pioneer DEH-P3600, P3800, and P3900

This DEH stereo line by Pioneer is one of the most popular single-DIN stereos on the block. Follow these steps to set the clock on these Pioneer car stereos.

Detect the Source button (often abbreviated as SRC-OFF) on the lower-left corner of the unit of measurement. Printing and concord information technology until the stereo turns off.
And so, search for the Part push button (FUNC) at the upper right corner of the unit. Printing the button and hold information technology until the clock appears. You lot have to printing and hold the SRC-OFF or Audio button to get the clock in some models.
Utilise the navigation panel (a knob with four buttons below the function button) to adjust the fourth dimension. Use the correct and left navigation buttons to shift between hours and minutes. Meanwhile, upwards and downwardly buttons can be used to gear up the numbers of hours and minutes.
After setting the clock, press the Part button to exit. In some stereos, you lot have to press the Source or Escape push to go out the clock setting interface.

How to Fix the Clock on a Pioneer Car Stereo? [Double DIN]

Most of the onetime double-DIN Pioneer stereos have the same procedure to ready the clock, as discussed above. On modern touchscreen Double DIN Pioneer stereos (similar AVH touchscreen series), it is fairly elementary to practice it.

Locate the clock on the screen and tap on information technology. Information technology volition open the clock settings.
Adjust the time and engagement with the format you want (12-60 minutes or 24 hours, d/mm/y or g/d/y)
Once done setting the clock, shut the window by tapping the Cancel button.

For visual aid see this video from Pioneer.

Hey, there mobile audio lovers! My proper noun is Vincent Talbot, founder and chief editor at 99carstereo.com. Inquire any mobile sound fanatic, installer, or visitor rep what makes a skilful automobile speaker, sub or amp, or, better yet, why he or she prefers a sure brand over another, and exist prepared to endure a litany of opinions, viewpoints, and passion-fueled perspectives. To be honest, mobile audio shopping can exist a daunting task without a guide, and then I've assembled what I feel are the best products to consider to make things easier for you. More well-nigh me.

Source: https://99carstereo.com/set-the-clock-on-a-pioneer-car-stereo-single-double-din/